請選擇您的送貨地點

國家/地區頁面的選擇會影響各種因素,例如價格、配送方式和產品可用性。
聯絡窗口
台灣易格斯有限公司

igus® Taiwan Company Ltd.

40850 台中市南屯區工業區24路35號5樓

+886 4 2358 1000
+886 4 2358 1100
TW(ZH)

Robot and motor control systems

The cost-effective and individually adaptable robot arms from igus® can be supplemented with different control concepts. A solution is available in the form of the industrial control system that is made by the company Commonplace Robotics GmbH and has been specially designed for robolink® D. It is supplied with an easy-to-use software. With the help of the software, the motion sequences of the robot are displayed and can be programmed and controlled in a manner that is easy to understand. The modular robolink® principle makes the robot arms usable with a self-programmed controller as well, thus offering maximum modularity. Due to the combination of robolink® gripper arm and control system, monotonous tasks, e.g. in quality assurance, assembly or commissioning, can be automated easily and the work sequences can also be coordinated effortlessly.
 

產品數量: 15

D1 assembly kit for 2-axis kinematics

Product information
  • Set of 2x igus® D1 dryve, proximity switches incl. bracket, connection cables with straight connector in 10m length
 
  • A wide range of automation tasks by simple parameterisation, no programming necessary
  • For single axes, line, flat, linear and room linear robots and delta robots
  • No software installation or app required
  • Use with PC, tablet or smart phone
  • Stepper (ST), DC and EC/BLDC motors with up to 21A peak currents and 48V
  • Digital inputs/outputs, analogue inputs, CANopen, ModbusTCP (CANopen gateway) for connection to master control systems, e.g. Siemens or Beckhoff

    TEST BEFORE INVEST - Try out the motor control system with online simulation D1 dryve控制器 before you buy 
87,919 TWD/件 以上
2 件物品, 準備發貨:
1 台灣無現貨,德國有現貨,可在交期20個工作日,如有提前到貨會盡快安排出貨。
至產品頁面

igus® Robot Control (iRC) software for gantries & delta robots

Product information
  • Diverse automation tasks with simple programming software
  • For gantries and delta robots
  • Easy software installation for Windows 10
  • Use with a PC or tablet
  • Seven digital inputs/outputs, CRI interface, ModbusTCP/IP for connection to master control systems, e.g. Siemens or Beckhoff
  • 10m cable length

You can find all relevant documents in the downloads below.

TEST BEFORE INVEST - Test the robot control system before you buy it with the igus® Robot Control software 
144,337 TWD/件 以上
至產品頁面

igus Robot Control Handheld

Product information
  • Handheld enables the robot to be commissioned and moved
  • Suitable for the igus Robot Control
  • Convenient operation for left and right-handers
  • User-friendly operation via touch display
55,586 TWD/件 以上
1 件物品, 準備發貨:
1 台灣無現貨,德國有現貨,通常可在20個工作日內出貨,如有提前到貨會盡快安排出貨。
至產品頁面

D1 assembly kit for 3-axis kinematics

Product information
  • Set of 3x igus® D1 dryve, proximity switches incl. bracket, connection cables with straight connector in 10m length
 
  • A wide range of automation tasks by simple parameterisation, no programming necessary
  • For single axes, line, flat, linear and room linear robots and delta robots
  • No software installation or app required
  • Use with PC, tablet or smart phone
  • Stepper (ST), DC and EC/BLDC motors with up to 21A peak currents and 48V
  • Digital inputs/outputs, analogue inputs, CANopen, ModbusTCP (CANopen gateway) for connection to master control systems, e.g. Siemens or Beckhoff

    TEST BEFORE INVEST - Try out the motor control system with online simulation D1 dryve控制器 before you buy 
131,879 TWD/件 以上
2 件物品, 準備發貨:
1 台灣無現貨,德國有現貨,可在交期20個工作日,如有提前到貨會盡快安排出貨。
至產品頁面

The robot control system igus® Robot Control for Scara and articulated arm robots

Product information
  • Diverse automation tasks with simple programming software
  • For SCARA robots and articulated arm robots
  • Easy software installation for Windows 10
  • Use with a PC or tablet
  • Seven digital inputs/outputs, CRI interface, ModbusTCP/IP for connection to master control systems, e.g. Siemens or Beckhof
  • 10m cable length

You can find all relevant documents in the downloads below.

TEST BEFORE INVEST - Test the robot control system before you buy it with the igus® Robot Control software 
144,337 TWD/件 以上
至產品頁面

igus Robot Control I/O Modul

Product information
  • Extension to 7 additional digital inputs and outputs
  • Suitable for the igus Robot Control
  • Plug&Play solution
14,508 TWD/件 以上
1 件物品, 準備發貨:
1 台灣無現貨,德國有現貨,通常可在20個工作日內出貨,如有提前到貨會盡快安排出貨。
至產品頁面

igus Robot Control motor modul

Product information
  • Extension of a motor module
  • Suitable for the igus Robot Control
  • Control of additional axes possible
  • Plug & Play solution
21,383 TWD/件 以上
2 件物品, 準備發貨:
1 台灣無現貨,德國有現貨,通常可在20個工作日內出貨,如有提前到貨會盡快安排出貨。
至產品頁面

D1 control system set for 3-axis kinematics

Product information 
  • A wide range of automation tasks by simple parameterisation, no programming necessary
  • For single axes, line, flat, linear and room linear robots and delta robots
  • No software installation or app required
  • Use with PC, tablet or smart phone
  • Stepper (ST), DC and EC/BLDC motors with up to 21A peak currents and 48V
  • Digital inputs/outputs, analogue inputs, CANopen, ModbusTCP (CANopen gateway) for connection to master control systems, e.g. Siemens or Beckhoff

    TEST BEFORE INVEST - Try out the motor control system with online simulation D1 dryve控制器 before you buy 
96,993 TWD/件 以上
1 件物品, 準備發貨:
1 台灣備有常備庫存,若訂購數量少於常備庫存,可在2個工作日內出貨,若訂購數量高於常備庫存,確切交期在下單後,訂單部門將予以回覆。
至產品頁面

D1 control system set for 2-axis kinematics

Product information 
  • A wide range of automation tasks by simple parameterisation, no programming necessary
  • For single axes, line, flat, linear and room linear robots and delta robots
  • No software installation or app required
  • Use with PC, tablet or smart phone
  • Stepper (ST), DC and EC/BLDC motors with up to 21A peak currents and 48V
  • Digital inputs/outputs, analogue inputs, CANopen, ModbusTCP (CANopen gateway) for connection to master control systems, e.g. Siemens or Beckhoff

    TEST BEFORE INVEST - Try out the motor control system with online simulation D1 dryve控制器 before you buy 
64,662 TWD/件 以上
1 件物品, 準備發貨:
1 台灣備有常備庫存,若訂購數量少於常備庫存,可在2個工作日內出貨,若訂購數量高於常備庫存,確切交期在下單後,訂單部門將予以回覆。
至產品頁面

Controller kit D7 for 2-axis-kinematics

Product information
  • Without connection cables
  • Set consists of 2x drylin D7
 
  • Can control stepper motors with up to 2.7 A continuous current at supply voltage of up to 48 V
  • Ready to use immediately
  • Easy control
  • Exact positioning
請洽易格斯
1 件物品, 準備發貨:
1 台灣無現貨,德國有現貨,可在交期20個工作日,如有提前到貨會盡快安排出貨。
至產品頁面
新品!

Controller kit D7 for 3-axis-kinematics

Product information
  • Without connection cables
  • Set consists of 3x drylin D7
 
  • Can control stepper motors with up to 2.7 A continuous current at supply voltage of up to 48 V
  • Ready to use immediately
  • Easy control
  • Exact positioning
13,832 TWD/件 以上
1 件物品, 準備發貨:
1 台灣備有常備庫存,若訂購數量少於常備庫存,可在2個工作日內出貨,若訂購數量高於常備庫存,確切交期在下單後,訂單部門將予以回覆。
至產品頁面

Controller kit D8 for 2-axis-kinematics

Product information
  • Without connection cables
  • Set consists of 2x drylin D8
 
  • Can control stepper motors with up to 4A continuous current at supply voltage of up to 48V
  • Ready to use immediately
  • Easy control
  • Exact positioning
請洽易格斯
1 件物品, 準備發貨:
1 台灣無現貨,德國有現貨,可在交期20個工作日,如有提前到貨會盡快安排出貨。
至產品頁面

Controller kit D8 for 3-axis-kinematics

Product information
  • Without connection cables
  • Set consists of 3x drylin D8
 
  • Can control stepper motors with up to 4A continuous current at supply voltage of up to 48V
  • Ready to use immediately
  • Easy control
  • Exact positioning
16,969 TWD/件 以上
1 件物品, 準備發貨:
1 台灣備有常備庫存,若訂購數量少於常備庫存,可在2個工作日內出貨,若訂購數量高於常備庫存,確切交期在下單後,訂單部門將予以回覆。
至產品頁面

Controller kit D9 for 2-axis-kinematics

Product information
  • Without connection cables
  • Set consists of 2x drylin D9
 
  • Can control stepper motors with up to 7A continuous current at supply voltage of up to 48V
  • Ready to use immediately
  • Easy control
  • Exact positioning
請洽易格斯
1 件物品, 準備發貨:
1 台灣無現貨,德國有現貨,可在交期20個工作日,如有提前到貨會盡快安排出貨。
至產品頁面

Controller kit D9 for 3-axis-kinematics

Product information
  • Without connection cables
  • Set consists of 3x drylin D9
 
  • Can control stepper motors with up to 7A continuous current at supply voltage of up to 48V
  • Ready to use immediately
  • Easy control
  • Exact positioning
18,602 TWD/件 以上
1 件物品, 準備發貨:
1 台灣備有常備庫存,若訂購數量少於常備庫存,可在2個工作日內出貨,若訂購數量高於常備庫存,確切交期在下單後,訂單部門將予以回覆。
至產品頁面

名稱 "Apiro", "AutoChain", "CFRIP", "chainflex", "chainge", "chains for cranes", "ConProtect", "cradle-chain", "CTD", "drygear", "drylin", "dryspin", "dry-tech", "dryway", "easy chain", "e-chain", "e-chain systems", "e-ketten", "e-kettensysteme", "e-loop", "energy chain", "energy chain systems", "enjoyneering", "e-skin", "e-spool", "fixflex", "flizz", "i.Cee", "ibow", "igear", "iglidur", "igubal", "igumid", "igus", "igus improves what moves", "igus:bike", "igusGO", "igutex", "iguverse", "iguversum", "kineKIT", "kopla", "manus", "motion plastics", "motion polymers", "motionary", "plastics for longer life", "print2mold", "Rawbot", "RBTX", "readycable", "readychain", "ReBeL", "ReCyycle", "reguse", "robolink", "Rohbot", "savfe", "speedigus", "superwise", "take the dryway", "tribofilament", "tribotape", "triflex", "twisterchain", "when it moves, igus improves", "xirodur", "xiros" 和 "yes" 是 igus® GmbH/科隆在德意志聯邦共和國以及某些外國適用的情況下受法律保護的商標。這是商標的非詳盡清單(例如igus® GmbH 或igus®在德國、歐盟、美國和/或其他國家或司法管轄區的附屬公司的待審商標申請或註冊商標。

igus® GmbH points out that it does not sell any products of the companies Allen Bradley, B&R, Baumüller, Beckhoff, Lahr, Control Techniques, Danaher Motion, ELAU, FAGOR, FANUC, Festo, Heidenhain, Jetter, Lenze, LinMot, LTi DRiVES, Mitsubishi, NUM, Parker, Bosh Rexroth, SEW, Siemens, Stöber and all other drive manufacturers mentioned on this website. The products offered by igus® are those of igus® GmbH.