聯絡窗口
台灣易格斯有限公司

igus® Taiwan Company Ltd.

40850 台中市南屯區工業區24路35號5樓

+886 4 2358 1000
+886 4 2358 1100

Gears & Gear racks Online-Shop

The gears made of tribologically optimised iglidur® high-performance polymers impress with their significantly higher service life than gears made of comparable plastics.
Due to fine-tuned additives of reinforcement materials and solid lubricants, they do not require additional lubrication.
In the industry's largest test laboratory, the gears made of iglidur® materials are thoroughly tested to continuously improve their service life.

類別
篩選
尺寸

產品數量: 19

新品!

iguform S270齒輪,mm

  • 低摩擦係數
  • 吸濕性低
  • 運動安靜

8種不同的模組可選。可選尺寸超過300個。

在此獲取匹配的齒輪齒條

要了解有關公差的資訊,請參閱產品說明。
1.96 USD/件 以上
318 件物品, 準備發貨:
314 交期待確認。
至產品頁面
新品!

iguform S270齒條,mm

  • 低摩擦係數
  • 吸濕性低
  • 運動安靜

可提供用於齒輪產品系列的匹配模組。

您可以在產品說明中找到有關長度的資訊。
5.20 USD/件 以上
8 件物品, 準備發貨:
8 交期待確認。
至產品頁面
新品!

igutek P360齒輪,mm

  • 耐磨性提高
  • 良好的耐摩擦性能
  • 結構非常堅固
  • 耐衝擊負載

8種不同的模組可選。可選尺寸超過300個。

在此獲取匹配的齒輪齒條

要了解有關公差的資訊,請參閱產品說明。
2.26 USD/件 以上
317 件物品, 準備發貨:
315 交期待確認。
至產品頁面
新品!

igutek P360齒輪,mm

  • 耐磨性提高
  • 良好的耐摩擦性能
  • 結構非常堅固
  • 耐衝擊負載

可提供用於齒輪產品系列的匹配模組。

您可以在產品說明中找到有關長度的資訊。
6.72 USD/件 以上
8 件物品, 準備發貨:
8 交期待確認。
至產品頁面

xirodur® B180,耐磨齒輪,mm

  • ​​​​​​摩擦係數非常低
  • 採用耐磨材料,可實現持續運行
  • 減震
  • 三種輪轂設計可選

在此獲取匹配的齒輪齒條
9.75 USD/件 以上
至產品頁面

iguform S270 bevel gears - ratio 1:1

  • Low coefficient of friction
  • Low moisture absorption
  • Quiet

Please note: in order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:1) can be combined with each other. Please make sure to select the same module.

Notes on tolerance specifications can be found in the product description.
Information on other dimensions can be found under Technical Data.
2.26 USD/件 以上
8 件物品, 準備發貨:
8 交期待確認。
至產品頁面

耐磨工程塑膠 iglidur® F,齒輪,mm

  • 導電 
  • 高抗壓強度
  • 良好的耐溫性
  • 有3種齒輪設計
請洽易格斯
至產品頁面

iglidur® A500齒輪,mm

  • 適用於食品行業的耐高溫耐用材料
  • 符合歐盟  10/2011法規
  • 符合FDA標準
  • 可耐受-100°C至+250°C的溫度
請洽易格斯
至產品頁面

igutek P360 bevel gears - ratio 1:1

  • Increased wear resistance
  • Good tribological specifications
  • Tough
  • Resistant to shock loads

Please note: in order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:1) can be combined with each other. Please make sure to select the same module.

Notes on tolerance specifications can be found in the product description.
Information on other dimensions can be found under Technical Data.
2.47 USD/件 以上
8 件物品, 準備發貨:
8 交期待確認。
至產品頁面

iguform S270 bevel gears - ratio 1:1,5

  • Low coefficient of friction
  • Low moisture absorption
  • Quiet

Please note: in order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:1.5) can be combined with each other. Please make sure to select the same module.

Notes on tolerance specifications can be found in the product description.
Information on other dimensions can be found under Technical Data.
7.54 USD/件 以上
2 件物品, 準備發貨:
2 交期待確認。
至產品頁面

iguform S270 bevel gears - ratio 1:2

  • Low coefficient of friction
  • Low moisture absorption
  • Quiet

Please note: in order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:2) can be combined with each other. Please make sure to select the same module.

Notes on tolerance specifications can be found in the product description.
Information on other dimensions can be found under Technical Data.
5.31 USD/件 以上
10 件物品, 準備發貨:
10 交期待確認。
至產品頁面

iguform S270 bevel gears - ratio 1:3

  • Low coefficient of friction
  • Low moisture absorption
  • Quiet


Please note: In order to achieve the desired transmission ratio, two bevel gears must be ordered.


The bevel gears listed here (1:3) can be combined with each other. Please make sure to select the same module.

Notes on tolerance specifications can be found in the product description.
Information on other dimensions can be found under Technical Data.
4.19 USD/件 以上
8 件物品, 準備發貨:
8 交期待確認。
至產品頁面

iguform S270 bevel gears - ratio 1:4

  • Low coefficient of friction
  • Low moisture absorption
  • Quiet

Please note: in order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:4) can be combined with each other. Please make sure to select the same module.

Notes on tolerance specifications can be found in the product description.
Information on other dimensions can be found under Technical Data.
3.48 USD/件 以上
6 件物品, 準備發貨:
6 交期待確認。
至產品頁面

iguform S270 bevel gears - ratio 1:5

  • Low coefficient of friction
  • Low moisture absorption
  • Quiet

Please note: in order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:5) can be combined with each other. Please make sure to select the same module.

Notes on tolerance specifications can be found in the product description.
Information on other dimensions can be found under Technical Data.
3.48 USD/件 以上
2 件物品, 準備發貨:
2 交期待確認。
至產品頁面

igutek P360 bevel gears - ratio 1:2

  • Increased wear resistance
  • Good tribological specifications
  • Tough
  • Resistant to shock loads

Please note: in order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:2) can be combined with each other. Please make sure to select the same module.

Notes on tolerance specifications can be found in the product description.
Information on other dimensions can be found under Technical Data.
6.32 USD/件 以上
10 件物品, 準備發貨:
10 交期待確認。
至產品頁面
The terms "igus", "Apiro", "CFRIP", "chainflex", "conprotect", "CTD", "drygear", "drylin", "dryspin", "dry-tech", "easy chain", "e-chain", "e-chain systems", "e-loop", "e-ketten", "e-kettensysteme", "e-spool", "e-skin", "flizz", "ibow", "igear", "iglidur", "igubal", "kineKIT", "manus", "motion plastics", "pikchain", "plastics for longer life", "print2mold", "readycable", "readychain", "ReBeL", "robolink", "speedigus", "tribofilament", "triflex", "xirodur" and "xiros" are legally protected trademarks of the igus® GmbH/Cologne in the Federal Republic of Germany, and, where applicable, in some foreign countries.
igus® GmbH points out that it does not sell any products of the companies Allen Bradley, B&R, Baumüller, Beckhoff, Lahr, Control Techniques, Danaher Motion, ELAU, FAGOR, FANUC, Festo, Heidenhain, Jetter, Lenze, LinMot, LTi DRiVES, Mitsubishi, NUM, Parker, Bosh Rexroth, SEW, Siemens, Stöber and all other drive manufacturers mentioned on this website. The products offered by igus® are those of igus® GmbH.