聯絡窗口
台灣易格斯有限公司

igus® Taiwan Company Ltd.

40850 台中市南屯區工業區24路35號5樓

+886 4 2358 1000
+886 4 2358 1100

iglidur® J260-PF,3D列印線材

  • 耐磨3D列印線材的使用壽命極長
  • 中低負載時摩擦係數極低
  • 可耐受達120°C的高溫
  • 高品質列印:適用於專業人士使用
產品描述
耐磨、耐高溫3D列印線材——iglidur J260-PF
 
iglidur J260可用作射出成型、圓棒材和3D列印的材料(線材),它在各種製造工藝中都具有非常相似的摩擦和磨損特性。因此,它是適用於從打樣(原型)件到批量生產的整個產品研發過程的可靠材料。它具有極佳的摩擦和磨損係數,且可長期耐高溫(最高120°C)。但是這種材料的加工要求很高:3D列印機的擠出溫度要能達到280°C,列印機板的溫度要能達到120°C,且最好有一個加熱安裝空間。如果無加熱安裝空間,則只能列印較小的零件。
 
適用場合:
  • 當iglidur I150或iglidur I180的耐磨性不足時
  • 當需要高達120°C的應用溫度時
  • 從打樣(原型製作)到批量生產:3D列印、圓棒材和射出成型使用同一種材料
不適用場合:
技術資料
附件
下載

諮詢

Photo
顏僑佑 Joe Yen

igus® Taiwan Company Ltd.

寫電子郵件

出貨及諮詢

親自拜訪:

週一至週五 8:30 - 17:30

Online:

週一至週五 8:30 - 17:30

The terms "igus", "Apiro", "CFRIP", "chainflex", "conprotect", "CTD", "drygear", "drylin", "dryspin", "dry-tech", "easy chain", "e-chain", "e-chain systems", "e-loop", "e-ketten", "e-kettensysteme", "e-spool", "e-skin", "flizz", "ibow", "igear", "iglidur", "igubal", "kineKIT", "manus", "motion plastics", "pikchain", "plastics for longer life", "print2mold", "readycable", "readychain", "ReBeL", "robolink", "speedigus", "tribofilament", "triflex", "xirodur" and "xiros" are legally protected trademarks of the igus® GmbH/Cologne in the Federal Republic of Germany, and, where applicable, in some foreign countries.
igus® GmbH points out that it does not sell any products of the companies Allen Bradley, B&R, Baumüller, Beckhoff, Lahr, Control Techniques, Danaher Motion, ELAU, FAGOR, FANUC, Festo, Heidenhain, Jetter, Lenze, LinMot, LTi DRiVES, Mitsubishi, NUM, Parker, Bosh Rexroth, SEW, Siemens, Stöber and all other drive manufacturers mentioned on this website. The products offered by igus® are those of igus® GmbH.