xiros® 徑向深溝滾珠軸承，xirodur C160，不銹鋼滾珠，PP 製成的保持器，mm

1/2

平滑運行
低吸濕性
化學抗性
耐海水
耐髒汙

產品代碼

xirodur® C160 | Low-cost chemical resistant

The material xirodur® C160 exhibits high chemical resistance at temperatures from 0 °C to +60 °C. In addition to good chemical resistance, the material has low media absorption. However, this is offset by higher wear and lower load absorption than xirodur® B180 and xirodur® A500.

Typical areas of application:

Food industry (system cleaning with chemicals)
Electroplating
Semiconductor industry
Vacuum applications
Autoclave applications

Tolerances and measuring system:

The tolerances for inner and outer diameters depend on the size. These are often approx. ±0.05 mm to the nominal dimension. The bearing rings are usually injection molded and naturally exhibit a certain ovality. For this reason, the caliper gauge is used to measure 90° to the injection point (if present) over the entire width of the bearing. The dimensions and tolerances are designed to meet an easy press fit by hand when using a H7 mounting as well as shaft h6. Additional axial securing by means of a circlip (shaft) and snap ring (housing) is recommended to prevent axial displacement.