聯絡窗口
台灣易格斯有限公司

40850

台中市南屯區

工業24路35號5樓

+886-4-2358-1000
+886-4-2358-1100

帶接頭的 drylin® E 直線滑台搭配步進馬達,NEMA17

  • Installation Size: NEMA 17 / flange dimension 42 mm
  • Protection class: Motor housing IP65 (shaft sealing IP52)
  • Holding torque: 0.50 Nm
  • Nominal current: 1.80 A
  • Motor connection: M12 metric connector
產品描述
NEMA17: Small, but lots of power
 
This little motor has impressive torque and high RPMs. Reliable operation with quick movements of low loads.
 
Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, their precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection.
 
The connector interface provides a high IP65 protection level (IP: International Protection). The higher the IP rating, the better the motor is protected from the ingress of dirt and water.
 
 
認證和標準
CE
EMV 準則
技術資料
附件
下載