媒體

High temperatures take a heavy toll on wearing parts in plants and equipment. If important bearing points fail, this leads to a shutdown. The consequence is a complex repair and long downtime with spiralling costs. To enable designers and maintenance engineers to quickly print their wear-resistant parts themselves for own use, igus has now developed a new maintenance-free filament with iglidur J350.

Medium to high loads in up to 180 degrees Celsius

The lubrication-free tribo-material is already offered by the motion plastics specialist in the plain bearing and bar stock range. The material is characterised above all by its extremely high wear resistance and its very low coefficients of friction on steel. The endurance runner is particularly suitable for rotation and has a high dimensional stability at high temperatures up to 180 degrees Celsius. Medium to high loads are no problem for the iglidur J350. Another benefit is that the material fulfils the fire prevention requirements of the Federal Aviation Administration of the USA (FAA) for aircraft interiors. Using a high-temperature 3D printer, the filament can be processed well on a printing plate equipped with a PET film. Typical application areas of the new filament can be found, for example, in the field of vending machine technology, in the automotive sector, in the glass industry and in mechanical engineering. In addition to iglidur J350, six more filaments are available from igus: from materials approved for food contact up to chemical-grade materials.

新聞照片
(2 MB) 正文
(248 KB) PDF預覽
(185 KB)