請選擇您的送貨地點

國家/地區頁面的選擇會影響各種因素，例如價格、配送方式和產品可用性。
查看所有地點
前往 www.igus.com
24小時內發貨 線上產品使用壽命計算 CAD文件 免註冊 免登入 免費下載
我的易格斯
購物車
(0)
聯絡窗口
台灣易格斯有限公司

igus® Taiwan Company Ltd.

40850 台中市南屯區工業區24路35號5樓

+886 4 2358 1000
+886 4 2358 1100
寫信給我們
全球聯繫窗口
TW(ZH)
選單
  1. 主頁
  2. 直線系統
  3. drylin® W 直線滑動軸承直線導軌
  4. system-design-vertical-1

drylin® T - System design, vertical, 1 rail and 1 carriage

2nd Step:

Check whether the clearances of the aggressive forces lie within the permitted values (see Maximum permitted clearances).

Maximum permitted clearances:

Option: 1 rail, 1 carriage
sy + sz < 2 Lx - Y0
ay + az < 2 Lx - Y0
sy < 5 Zm
sz < 5 Zm

3rd Step:

Calculate the required driving power

Initially four calculations should be carried out:
The driving power Fa corresponds to the calculated maximum value:



4th Step:

Calculate the maximum bearing load

4.1

Maximum bearing load in y-direction

4.2

Maximum bearing load in z-direction
A = Point of origin


Variables in the calculation:

Fa: Driving power [N]
Fs: Mass force [N]
Fy, Fz: Bearing load in y- or z-direction [N]
sx, sy, sz: Clearance of the mass force
in x-, y- or z-direction 		[mm]
ay, az: Clearance of the driving power
in y- or z-direction 		[mm]
wx: Clearance of the carriage on a rail [mm]
LX: Constant based on the installation size [mm]
Zm: Constant based on the installation size [mm]
Y0: Constant based on the installation size [mm]
b: Clearance of the guide rails [mm]
µ: Coefficient of friction,
µ = 0 in static loads,
µ = 0.2 in dynamic loads 		 
ZW: Number of carriages per rail  


The constant values:

Order no. LX ZM Y0
  [mm] [mm] [mm]
TW-01-15 29 16 11,5
TW-01-20 35 23 15,0
TW-01-25 41 25 19,0
TW-01-30 49 29 21,5


Coefficients:

  1 rail,
1 carriages
K1 |(ay+Y0)/Lx|
K2 (sy+Y0)/Lx
K3 |az/Lx|
K4 |sx/Lx|
K5 sz/Lx
K6 |(sy+Y0)/Zm|
K7 |sz/Zm|

5th Step:

Check the maximum bearing load of the most strongly stressed bearing with the calculated load in Step No. 4.

Maximum permitted load:

Order no. Fymax, Fzmax
[N]
TW-01-15 2000
TW-01-20 3700
TW-01-25 5000
TW-01-30 7000

6th Step:

Determination of the maximum permitted speed for the load in Step No. 4
Diagram for the determination of the maximum permitted speed for the determined bearing load.
X = centric bearing load [N]
Y = permitted mean velocity [m/s]

名稱 "Apiro", "AutoChain", "CFRIP", "chainflex", "chainge", "chains for cranes", "ConProtect", "cradle-chain", "CTD", "drygear", "drylin", "dryspin", "dry-tech", "dryway", "easy chain", "e-chain", "e-chain systems", "e-ketten", "e-kettensysteme", "e-loop", "energy chain", "energy chain systems", "enjoyneering", "e-skin", "e-spool", "fixflex", "flizz", "i.Cee", "ibow", "igear", "iglidur", "igubal", "igumid", "igus", "igus improves what moves", "igus:bike", "igusGO", "igutex", "iguverse", "iguversum", "kineKIT", "kopla", "manus", "motion plastics", "motion polymers", "motionary", "plastics for longer life", "print2mold", "Rawbot", "RBTX", "readycable", "readychain", "ReBeL", "ReCyycle", "reguse", "robolink", "Rohbot", "savfe", "speedigus", "superwise", "take the dryway", "tribofilament", "triflex", "twisterchain", "when it moves, igus improves", "xirodur", "xiros" 和 "yes" 是 igus® GmbH/科隆在德意志聯邦共和國以及某些外國適用的情況下受法律保護的商標。這是商標的非詳盡清單（例如igus® GmbH 或igus®在德國、歐盟、美國和/或其他國家或司法管轄區的附屬公司的待審商標申請或註冊商標。

igus® GmbH points out that it does not sell any products of the companies Allen Bradley, B&R, Baumüller, Beckhoff, Lahr, Control Techniques, Danaher Motion, ELAU, FAGOR, FANUC, Festo, Heidenhain, Jetter, Lenze, LinMot, LTi DRiVES, Mitsubishi, NUM, Parker, Bosh Rexroth, SEW, Siemens, Stöber and all other drive manufacturers mentioned on this website. The products offered by igus® are those of igus® GmbH.