聯絡窗口
台灣易格斯有限公司

40850

台中市南屯區

工業24路35號5樓

+886-4-2358-1000
+886-4-2358-1100

帶接頭、編碼器和制動器的 drylin® E 免上油線性系統步進馬達,NEMA 34

  • Installation size: NEMA 34 / flange dimension 86 mm
  • Protection class: Motor housing IP65 (shaft sealing IP52)
  • Holding torque: 5.90 Nm
  • nominal current: 6,40 A
  • Motor connections: Metric M17 connectors (swivels ± 90°)
  • Brake voltage: 24V
  • integrated brake for vertical loads
產品描述
NEMA34: The power pack in the large installation size
 
Applications with higher loads are implemented using the largest series. Heavy-duty format adjustments or parallel dual axis setups are among its primary duties.
 
Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, their precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection.
 
The encoder sends signals from the motor to the motor control. The encoder verifies that the required linear motion has occurred precisely as required. Encoder = increased machine accuracy.
 
The brake can hold the payload in position when the motor is not under power. This is used as a safety feature during power failures – strongly recommended for vertically mounted systems.
 

 
 
認證和標準
CE
EMV 準則
技術資料
下載