請選擇您的送貨地點

國家/地區頁面的選擇會影響各種因素，例如價格、配送方式和產品可用性。
查看所有地點
前往 www.igus.com
24小時內發貨 線上產品使用壽命計算 CAD文件 免註冊 免登入 免費下載
我的易格斯
購物車
(0)
聯絡窗口
台灣易格斯有限公司

igus® Taiwan Company Ltd.

40850 台中市南屯區工業區24路35號5樓

+886 4 2358 1000
+886 4 2358 1100
寫信給我們
全球聯繫窗口
TW(ZH)
選單
  1. 主頁
  2. 動態能量傳輸保護拖鏈
  3. 拖鏈知識庫
  4. Assembly Overview
  5. twisterband

twisterband

Installation guide for twisterband

TPE outer jacket

Dimensioning: Cable selection

When selecting cables, pay particular attention to good abrasion and gliding properties. An ideal jacket material is TPE.
Recommendation: chainflex® cable CF9
Special shielded cables for the use in twisterband are in preparation. Please contact us if the use of shielded cables is essential

Dimensioning: Filling

twisterband-Version with lock:
TB20.44.18.x.01.0 | TB30.75.22.x.01.0

A = separate cables with crossbars
 
B = Insert cables sorted according to diameter or bending radius. Insert thin, small ones inward – then increasingly bigger ones outward.
 

 

C = Not more than two cables on top of each other. 10% of the larger diameter or a minimum of 1 mm between all cables
 

 

 
D = 10% of the larger diameter or a
minimum of 1 mm between all cables
 

E = 10% of the larger diameter or a
minimum of 1 mm between all cables and separators

twisterband version with easy locking:
TB12.23.09.x.01.0 | TB20.44.12.x.01.0


A = insert cables sorted according to diameter or bending radius. Insert thin, small ones inward – then increasingly bigger ones outward.
 

 

 
B = A minimum of 1 mm or 10% of the larger diameter => Ø B between all cables
 

 

 

 

C = Not more than 2 cables on top of each other. A minimum of 1 mm or
10% of the larger diameter between all cables

Assembly: Mounting brackets

1. Insert twisterband between the steel parts.
2. Secure the twisterband by screwing the mounting bracket in place.

Assembly: guide shaft

Insert a centric shaft as a guide for vertical installation orientations starting at 1500° rotation angles.
Generally, insert a centric shaft as support for horizontal installation orientations.

Assembly: Strain relief

- Strain relief the cables on both ends
- Ensure that the cable tie lock does not point in the direction of the energy chain

Final position:

The twisterband must not be twisted up to the end. To avoid excessive strain on the cables, a min. reserve of 90° must be planned in front of each mounting point.

twisterband®

Installation videos

Part 1
Part 2
Part 3

名稱 "Apiro", "AutoChain", "CFRIP", "chainflex", "chainge", "chains for cranes", "ConProtect", "cradle-chain", "CTD", "drygear", "drylin", "dryspin", "dry-tech", "dryway", "easy chain", "e-chain", "e-chain systems", "e-ketten", "e-kettensysteme", "e-loop", "energy chain", "energy chain systems", "enjoyneering", "e-skin", "e-spool", "fixflex", "flizz", "i.Cee", "ibow", "igear", "iglidur", "igubal", "igumid", "igus", "igus improves what moves", "igus:bike", "igusGO", "igutex", "iguverse", "iguversum", "kineKIT", "kopla", "manus", "motion plastics", "motion polymers", "motionary", "plastics for longer life", "print2mold", "Rawbot", "RBTX", "readycable", "readychain", "ReBeL", "ReCyycle", "reguse", "robolink", "Rohbot", "savfe", "speedigus", "superwise", "take the dryway", "tribofilament", "triflex", "twisterchain", "when it moves, igus improves", "xirodur", "xiros" 和 "yes" 是 igus® GmbH/科隆在德意志聯邦共和國以及某些外國適用的情況下受法律保護的商標。這是商標的非詳盡清單（例如igus® GmbH 或igus®在德國、歐盟、美國和/或其他國家或司法管轄區的附屬公司的待審商標申請或註冊商標。

igus® GmbH points out that it does not sell any products of the companies Allen Bradley, B&R, Baumüller, Beckhoff, Lahr, Control Techniques, Danaher Motion, ELAU, FAGOR, FANUC, Festo, Heidenhain, Jetter, Lenze, LinMot, LTi DRiVES, Mitsubishi, NUM, Parker, Bosh Rexroth, SEW, Siemens, Stöber and all other drive manufacturers mentioned on this website. The products offered by igus® are those of igus® GmbH.