General specifications | Unit | iglidur® J | iglidur® X | iglidur® J200 | Testing method |
Density | g/cm³ | 1,49 | 1,44 | 1,72 | |
Colour | yellow | black | dark grey | ||
max. moisture absorption at 23°C/50% r.h. | % weight | 0,3 | 0,1 | 0,2 | DIN 53495 |
max. total moisture absorption | % weight | 1,3 | 0,5 | 0,7 | |
Coefficient of sliding friction, dynamic, against steel | µ | 0,06 - 0,18 | 0,09 - 0,27 | 0,11 - 0,22 | |
pxv value, max. (dry) | MPa x m/s | 0,34 | 1,32 | 0,33 | |
Mechanical properties | |||||
Flexural modulus | MPa | 2.400 | 8.100 | 2.800 | DIN 53457 |
Flexural strength at 20°C | MPa | 73 | 170 | 58 | DIN 53452 |
Compressive strength | MPa | 60 | 100 | 43 | |
maximum recommended surface pressure (20°C) | MPa | 35 | 150 | 23 | |
Shore D hardness | 74 | 85 | 70 | DIN 53505 | |
Physical and thermal properties | |||||
max. long-term application temperature | °C | +90 | +250 | +90 | |
max. short-term application temperature | °C | +120 | +315 | +120 | |
min. application temperature | °C | -50 | -100 | -50 | |
Thermal conductivity | [W/m x K] | 0,25 | 0,6 | 0,24 | ASTM C 177 |
Coefficient of thermal expansion (at 23°C) | [K-1 x 10-5] | 10 | 5 | 8 | DIN 53752 |
Electrical properties | |||||
specific contact resistance | Ωcm | > 1013 | < 105 | > 108 | DIN IEC 93 |
Surface resistance | Ω | > 1012 | < 103 | > 108 | DIN 53482 |
General specifications | Unit | iglidur® E7 | iglidur® A180 | Testing method |
Density | g/cm³ | 1,05 | 1,46 | |
Colour | dark grey | white | ||
max. moisture absorption at 23°C/50% r.h. | % weight | 0,1 | 0,2 | DIN 53495 |
max. total moisture absorption | % weight | 0,1 | 1,3 | |
Coefficient of sliding friction, dynamic, against steel | µ | 0,05–0,23 | ||
pxv value, max. (dry) | MPa x m/s | 0,31 | ||
Mechanical properties | ||||
Flexural modulus | MPa | 1.477 | 2.300 | DIN 53457 |
Flexural strength at 20°C | MPa | 22 | 88 | DIN 53452 |
Compressive strength | MPa | 78 | ||
maximum recommended surface pressure (20°C) | MPa | 18 | 28 | |
Shore D hardness | 61 | 76 | DIN 53505 | |
Physical and thermal properties | ||||
max. long-term application temperature | °C | +70 | +90 | |
max. short-term application temperature | °C | +90 | +110 | |
min. application temperature | °C | -50 | -50 | |
Thermal conductivity | [W/m x K] | 0,25 | ASTM C 177 | |
Coefficient of thermal expansion (at 23°C) | [K-1 x 10-5] | 11 | DIN 53752 | |
Electrical properties | ||||
specific contact resistance | Ωcm | < 1012 | DIN IEC 93 | |
Surface resistance | Ω | > 109 | < 1011 | DIN 53482 |
名稱 "Apiro", "AutoChain", "CFRIP", "chainflex", "chainge", "chains for cranes", "ConProtect", "cradle-chain", "CTD", "drygear", "drylin", "dryspin", "dry-tech", "dryway", "easy chain", "e-chain", "e-chain systems", "e-ketten", "e-kettensysteme", "e-loop", "energy chain", "energy chain systems", "enjoyneering", "e-skin", "e-spool", "fixflex", "flizz", "i.Cee", "ibow", "igear", "iglidur", "igubal", "igumid", "igus", "igus improves what moves", "igus:bike", "igusGO", "igutex", "iguverse", "iguversum", "kineKIT", "kopla", "manus", "motion plastics", "motion polymers", "motionary", "plastics for longer life", "print2mold", "Rawbot", "RBTX", "readycable", "readychain", "ReBeL", "ReCyycle", "reguse", "robolink", "Rohbot", "savfe", "speedigus", "superwise", "take the dryway", "tribofilament", "triflex", "twisterchain", "when it moves, igus improves", "xirodur", "xiros" 和 "yes" 是 igus® GmbH/科隆在德意志聯邦共和國以及某些外國適用的情況下受法律保護的商標。這是商標的非詳盡清單(例如igus® GmbH 或igus®在德國、歐盟、美國和/或其他國家或司法管轄區的附屬公司的待審商標申請或註冊商標。
igus® GmbH points out that it does not sell any products of the companies Allen Bradley, B&R, Baumüller, Beckhoff, Lahr, Control Techniques, Danaher Motion, ELAU, FAGOR, FANUC, Festo, Heidenhain, Jetter, Lenze, LinMot, LTi DRiVES, Mitsubishi, NUM, Parker, Bosh Rexroth, SEW, Siemens, Stöber and all other drive manufacturers mentioned on this website. The products offered by igus® are those of igus® GmbH.